Metaclik 475
Metaclik 475
Product description
Technical features – Aluminium
| s (mm) | J (cm4/m) | W+ (cm3/m) | W- (cm3/m) |
|---|---|---|---|
| 0,7 | 14,58 | 4,39 | 4,00 |
| 0,8 | 16,70 | 5,03 | 4,88 |
| 1,0 | 20,94 | 6,33 | 6,75 |
Technical features – Steel
| s (mm) | J (cm4/m) | W+ (cm3/m) | W- (cm3/m) |
|---|---|---|---|
| 0,6 | 12,48 | 3,75 | 3,27 |
| 0,8 | 16,69 | 5,03 | 4,88 |
s = sheet thickness; J = moment of inertia; W+ = modulus of flexural strength; W- = modulus of flexural strength
Download
Technical Data
| Material | Alloy | Specific Weight (kg/dm3) | Yield tension (Mpa min.) |
|---|---|---|---|
| Steel | S250GD | 7,85 | 250 |
| Aluminium | Al 5754 H18 | 2,70 | 250 |
Capacity table for multiple spans
STEEL
| Spacing L (mm) | 0,80 | 1,00 | 1,20 | 1,40 | 1,60 | 1,80 | |
|---|---|---|---|---|---|---|---|
| Thickness(mm) | uniformly distributed load q (kN/m2) | ||||||
| 0,6 | 6,29 | 4,03 | 2,80 | 2,05 | 1,57 | 1,24 | |
| 0,8 | 8,36 | 5,48 | 3,80 | 2,80 | 2,10 | 1,68 | |
ALUMINIUM
| Spacing L (mm) | 0,80 | 1,00 | 1,20 | 1,40 | 1,60 | 1,80 |
|---|---|---|---|---|---|---|
| Thickness(mm) | uniformly distributed load q (kN/m2) | |||||
| 0,7 | 7,40 | 4,74 | 3,29 | 2,42 | 1,85 | 1,36 |
| 0,8 | 8,68 | 5,56 | 3,86 | 2,84 | 2,17 | 1,55 |
| 1,0 | 11,18 | 7,15 | 4,97 | 3,65 | 2,77 | 1,95 |
Profile
Steel colours
Aluminium Colours
Components
MetaBlok
Available in extruded aluminum or reinforced PA66 polyamide.
Lower bracket, complete with 2 M8 screws, for fixing the Metaclik system to the structure (wood or metal).
MetaStart
This is the bracket used on the first starting sheet.
It is fixed simultaneously with the MetaBlok bracket.
MetaTop
Available in extruded aluminum or reinforced PA66 polyamide.
Upper bracket, complete with 1 stainless steel M8 screw for tightening the bracket to the overlap corrugation, for positioning roof accessories: lifelines, snow guards, walkways, photovoltaic panels, etc.
“Control Drop” System
On the Metaclik “Control Drop” draining joint sheets, the fabric is applied to the lower side of the sheets so that standard metal roofing installation techniques can be followed.
However, during roof construction, certain precautions must be taken to prevent moisture from rising through capillary action.
To allow the interlocking of the sheets, the fabric is applied to the flat part of the sheet’s underside, ensuring full functionality of the snap-overlap components.
Related products
Metaclik 590
Metaclik 325